SKF, Page 5
We can arrange delivery of almost any SKF product, even if it is not currently listed in our catalogue.
Send us the designation, a photo of the nameplate, dimensions or a description of the application, and we will check availability.
SKF – product identification and supply
The SKF designation may appear on different technical products and spare parts. To identify the exact item reliably, we therefore work from the complete marking and the available technical data.
The exact item should be selected by its complete designation and technical parameters. Dimensions, design, material and operating conditions are important when matching a replacement.
For an accurate quotation, please provide the full marking, required quantity and any available documentation. We will compare the specification and verify a suitable delivery option.
Product sorting
List of products
Bearing - 6007 2RS1 SKF
35 × 62 × 14 mm. Rubber seals on both sides.
Bearing - EL 5 SKF
5 × 16 × 5 mm. is a miniature single-row deep-groove ball bearing dimensionally corresponding to the 625 series. Its deep raceway design supports radial load and moderate axial loads in both directions. The EL 5 designation shown does not specify shielding, sealing or internal clearance. Check the physical design and complete marking of the original bearing before selecting a replacement.
Needle roller bearing - HK 0810 SKF
8 × 12 × 10 mm. is a drawn-cup needle roller bearing with open ends. Its compact cross-section provides high radial load carrying capacity and stiffness; it is not intended to support axial load. The bearing has no separate inner ring, so a suitably hardened and ground shaft surface normally forms the raceway. Correct shaft quality, housing fit and lubrication are essential for service life.
Bearing - 61905 2RS1 SKF
25 × 42 × 9 mm. Rubber seals on both sides.
Bearing - 22224 E SKF
120 × 215 × 58 mm. double-row spherical roller bearing with high load capacity and a self-aligning design for heavy-duty arrangements subject to misalignment.
Bearing - 6203 2Z SKF
17 × 40 × 12 mm. Metal shields on both sides.
Bearing - 6003 2RSH SKF
17 × 35 × 10 mm. single-row deep-groove ball bearing with high-performance contact seals on both sides for reliable protection of the lubricant and bearing interior.
Bearing - 6204 2ZNR SKF
20 × 47 × 14 mm. deep-groove ball bearing is a single-row radial bearing with non-contact metal shields on both sides. It supports radial loading and moderate axial forces in either direction. The 2Z shields help retain lubricant and keep out coarse contaminants while maintaining low friction and suitability for higher speeds. The outer-ring groove and supplied NR snap ring provide straightforward axial….
Bearing - 61913 SKF
SKF rolling bearing for industrial bearing arrangements. Before selection, verify the complete designation, dimensions and operating parameters in the manufacturer documentation.
Bearing - 6309 2RS1 SKF
45 × 100 × 25 mm. SKF bearing for industrial applications. When replacing a part, always verify the complete designation, dimensions, design and application requirements against the manufacturer documentation.
Bearing - 71906/VA9D1 SKF
30 × 47 × 9 mm. super-precision angular contact ball bearing is a single-row, universally matchable design for driven tools. Its 25° contact angle accommodates combined radial and axial loading, with a single bearing carrying axial load in one direction.
Bearing - 32022 X SKF
110 × 170 × 38 mm. The single-row tapered roller bearing is a separable bearing for high radial loads combined with axial load in one direction. The cone assembly can be mounted separately from the outer ring, simplifying installation and maintenance. This open, unsealed design requires suitable lubrication. Opposed bearing arrangements are normally used when axial loads must be supported in both directions.
Bearing - 22320 E SKF
100 × 215 × 73 mm. The spherical roller bearing is a double-row self-aligning bearing for very high radial loads and simultaneous axial loads in both directions. Its spherical outer-ring raceway helps accommodate misalignment between the shaft and housing. This robust open bearing has a cylindrical bore and is intended for demanding industrial applications with suitable lubrication.
Bearing - 62206 2RS1 SKF
30 × 62 × 20 mm. Rubber seals on both sides. The deep-groove ball bearing is a single-row bearing with contact seals on both sides. Its 30 × 62 × 20 mm dimensions, factory grease fill and effective lubricant retention make it suitable for compact, protected bearing arrangements.
Bearing - YAR 207 2F SKF
35 × 72 × 42.9 mm. insert bearing has an inner ring extended on both sides and locks onto the shaft with two set screws. A spherical outside surface, contact seals with flingers on both sides and relubrication capability support easy installation and reliable operation.
Bearing - 6314/C3VL0241 SKF
SKF single-row deep groove ball bearing with VL0241 electrically insulated outer ring, cylindrical bore and C3 clearance. 70 × 150 × 35 mm; VL0241; no seal.
Bearing - 61903 2RS1 SKF
17 × 30 × 7 mm. Rubber seals on both sides.