SKF, Page 6
We can arrange delivery of almost any SKF product, even if it is not currently listed in our catalogue.
Send us the designation, a photo of the nameplate, dimensions or a description of the application, and we will check availability.
SKF – product identification and supply
The SKF designation may appear on different technical products and spare parts. To identify the exact item reliably, we therefore work from the complete marking and the available technical data.
The exact item should be selected by its complete designation and technical parameters. Dimensions, design, material and operating conditions are important when matching a replacement.
For an accurate quotation, please provide the full marking, required quantity and any available documentation. We will compare the specification and verify a suitable delivery option.
Product sorting
List of products
Bearing - 629 2RSH SKF
9 × 26 × 8 mm. Contact seals of synthetic rubber (NBR) on both sides.
FY 507 M SKF by SKF: flanged bearing housing (square flange).
Dimensions according to drawing: L = 118 mm; J = 92 mm; A2 = 13 mm; A1 = 34.5 mm
Bearing - 6305 2ZC3 SKF
25 × 62 × 17 mm. deep-groove ball bearing is a single-row bearing with steel shields on both sides and C3 radial internal clearance. It carries radial loads and moderate axial loads in both directions and is suitable for higher-speed operation.
Bearing - 6205 2RS C3 SKF
25 × 52 × 15 mm. Rubber seals on both sides. Greater radial internal clearance.
Bearing - 6304 2Z C3 SKF
20 × 52 × 15 mm. deep-groove ball bearing is a single-row bearing with steel shields on both sides and C3 radial internal clearance. It carries radial loads and moderate axial loads in both directions and is suitable for higher-speed operation.
Bearing - 6208 2Z C3 SKF
40 × 80 × 18 mm. deep-groove ball bearing is a single-row bearing with steel shields on both sides and C3 radial internal clearance. It carries radial loads and moderate axial loads in both directions and is suitable for higher-speed operation.
Bearing - 6207 2Z SKF
35 × 72 × 17 mm. Metal shields on both sides.
Bearing - 6000 2RS1 SKF
10 × 26 × 8 mm. deep-groove ball bearing is a single-row bearing with rubber seals on both sides. It carries radial loads and moderate axial loads in both directions while protecting the factory grease against leakage and common contaminants.
FYC 50 TF SKF by SKF: flange bearing unit (round flange).
Dimensions according to drawing: Shaft diameter: 50 mm; L = 165 mm; J = 138 mm; B = 51.6 mm; N = 16 mm; Da = 110 mm; T = 42.6 mm
Bearing - 6301 2RS SKF
12 × 37 × 12 mm. Rubber seals on both sides.
Bearing - 6203 2RS C3 SKF
17 × 40 × 12 mm. Rubber seals on both sides. Greater radial internal clearance.
Bearing - YAR 206 2F SKF
30 × 62 × 38.1 mm. Insert bearing is designed for bearing units and is secured to the shaft by two set screws in the extended inner ring. This arrangement provides quick and reliable mounting. A contact seal and flinger on both sides help protect the bearing from contaminants. The design is suitable for both constant and alternating directions of rotation.
Bearing - 6012 SKF
60 × 95 × 18 mm. Deep groove ball bearing is a single-row bearing in an open design. It accommodates radial loads and moderate axial loads in both directions and is suitable for accurate shaft support. The open construction has no integral shields or seals, allowing direct lubricant access but requiring a clean or externally protected environment and a correctly designed lubrication system.
Bearing - 2306 E 2RS1TN9 SKF
30 × 72 × 27 mm. Self-aligning ball bearing has two rows of balls and a common spherical raceway in the outer ring. This design accommodates static and dynamic misalignment between the shaft and housing. Seals on both sides help protect the bearing interior from contaminants. It is suitable for arrangements where shaft deflection or mounting misalignment can occur.
Bearing - 22218 CCKW33 SKF
90 × 160 × 40 mm. Spherical roller bearing with a tapered bore and W33 relubrication features. It carries high radial loads and axial loads in both directions, while its self-aligning design accommodates misalignment.
Bearing - 22214 CC SKF
70 × 125 × 31 mm. Spherical roller bearing with a cylindrical bore for high radial loads and axial loads in both directions. Its self-aligning design accommodates misalignment and shaft deflection.
Bearing - YAR 209 2F SKF
45 × 85 × 49.2 mm. Technické provedení a kompatibilitu ověřte podle úplného označení výrobce a požadavků aplikace.
Bearing - 6308 2Z C3 SKF
40 × 90 × 23 mm. Metal shields on both sides. Greater radial internal clearance. Single-row deep-groove ball bearing for radial load and axial loads in both directions. Two non-contact metal shields retain lubricant with low friction; C3 clearance provides allowance for tight fits or elevated operating temperature.