ZVL, Page 4

Bearing - 30213 A P6X ZVL

65 × 120 × 24.75 mm. Single-row tapered roller bearing for combined radial load and axial load in one direction. The P6X precision version is intended for arrangements with higher dimensional and running-accuracy requirements; the complete A P6X designation must match the machine documentation.

Bearing - 30210 A P6X ZVL

50 × 90 × 21.75 mm. Single-row tapered roller bearing for high radial loads and axial load in one direction. The P6X tolerance version is intended for arrangements with higher accuracy requirements; the complete A P6X designation must match when replacing the bearing.

Bearing - 6210 2RSR ZVL

50 × 90 × 20 mm. Rubber seals on both sides. Single-row deep-groove ball bearing for radial load and moderate axial loads in both directions. Contact rubber seals on both sides retain lubricant and protect the rolling elements from dust, contaminants and splashing moisture.

Bearing - NUP 206 E ZVL

30 × 62 × 16 mm. single-row cylindrical roller bearing carries high radial loads and locates the shaft axially in both directions through its flange arrangement. The E suffix denotes an optimized internal design with increased load capacity.

Bearing - 6408 ZVL

40 × 100 × 25 mm. Rolling bearing for use in machinery and equipment.

Bearing - 6410 ZVL

50 × 130 × 31 mm. Rolling bearing for use in machinery and equipment.

Bearing - 6010 2Z ZVL

50 × 80 × 16 mm. Metal shields on both sides.

Bearing - 6215 2RS ZVL

75 × 130 × 25 mm. Bearing with rubber seals on both sides for use in machinery and equipment.

Bearing - 6212 N ZVL

60 × 110 × 22 mm. Technické provedení a kompatibilitu ověřte podle úplného označení výrobce a požadavků aplikace.

Bearing - 6212 2RSR ZVL

60 × 110 × 22 mm. Rubber seals on both sides.

Bearing - 6305 N ZVL

25 × 62 × 17 mm. Technické provedení a kompatibilitu ověřte podle úplného označení výrobce a požadavků aplikace.

Bearing - 6308 2Z ZVL

40 × 90 × 23 mm. Metal shields on both sides.

Bearing - 22309 EW33J ZVL

45 × 100 × 36 mm. Bearing for industrial rotating assemblies. Before selection, verify the complete designation, dimensions and requirements of the specific application.

Bearing - 51206 ZVL

30 × 52 × 16 mm. thrust ball bearing is designed to carry axial load in one direction. It is used where force acting along the shaft axis must be reliably supported.

Bearing - 3208 2RS ZVL

40 × 80 × 30 mm. Rubber seals on both sides.

Bearing - 6211 2RS ZVL

55 × 100 × 21 mm. Rubber seals on both sides.

Bearing - 31308 A ZVL

40 × 90 × 25.25 mm. Technické provedení a kompatibilitu ověřte podle úplného označení výrobce a požadavků aplikace.

Bearing - 30214 A ZVL

70 × 125 × 26.25 mm. Technické provedení a kompatibilitu ověřte podle úplného označení výrobce a požadavků aplikace.