25 × 62 × 17 mm. single-row deep groove ball bearing with contact rubber seals on both sides. It carries radial and moderate axial loads in both directions while protecting the rolling elements from dust, contamination and lubricant loss.
12 × 32 × 10 mm. single-row deep groove ball bearing with non-contact metal shields on both sides. It combines low friction and lubricant retention with reliable radial and moderate axial load support in both directions. The FAG Generation C design is optimised for low friction and quiet running.
50 × 80 × 16 mm. single-row deep groove ball bearing in an open design. Deep raceways carry radial and moderate axial loads in both directions with low friction.
9 × 26 × 8 mm. single-row deep groove ball bearing in an open design. Deep raceways carry radial and moderate axial loads in both directions with low friction.
15 × 32 × 9 mm. single-row deep groove ball bearing with non-contact metal shields on both sides. It combines low friction and lubricant retention with reliable radial and moderate axial load support in both directions.
45 × 85 × 19 mm. Single-row deep groove ball bearing with contact rubber seals on both sides. It carries radial and limited axial loads in both directions; the seals retain lubricant and protect the rolling contact from contaminants.
17 × 35 × 8 mm. bearing with clearly stated mounting dimensions. The product name gives no suffix for closure or clearance; compare the complete marking on the original bearing before replacement.
Double-direction thrust ball bearing for axial loads in both directions. Overall dimensions 35 × 73 × 37 mm. The separable two-row assembly is intended exclusively for axial forces and cannot carry radial loads.
25 × 62 × 17 mm. Single-row deep groove ball bearing with non-contact metal shields on both sides. It carries radial and limited axial loads in both directions; the shields retain lubricant while maintaining low friction.
5 × 16 × 5 mm. bearing with clearly stated mounting dimensions. The product name gives no suffix for closure or clearance; compare the complete marking on the original bearing before replacement.
20 × 42 × 12 mm. Single-row SKF Explorer 6004 2RSH deep groove ball bearing with low-friction seals on both sides and normal CN radial clearance. It carries radial and axial loads in both directions, is grease lubricated and requires little maintenance.
10 × 26 × 8 mm. Single-row deep groove ball bearing with a non-contact metal shield on one side. It carries radial and limited axial loads in both directions; the open side provides access to the rolling contact.
30 × 72 × 19 mm. Single-row deep groove ball bearing with a non-contact metal shield on one side. It carries radial and limited axial loads in both directions; the opposite side remains open.
