Bearing - DHK 2526 FAG
Related products
17x40x12 mm
Metal shield on one side. ZKL single-row deep groove ball bearing for versatile rotating assemblies.
25x52x15 mm
Contact seals of synthetic rubber (NBR) on both sides. Versatile SKF deep groove ball bearing for protected arrangements.
15x32x9 mm
6002 2Z C3 ZKL deep-groove ball bearing with two metal shields and increased radial clearance.
15x35x11 mm
Single-row 6202 2RS INA deep-groove ball bearing
Rubber seals on both sides; compare the complete designation before ordering.
60x130x46 mm
Double-row ZKL 22312 KJB spherical roller bearing for high radial loads and axial loads in both directions.
17x47x14 mm
Single-row 6303 Z ZKL deep-groove ball bearing
Metal shield on one side; compare the complete designation, including suffixes.
8x16x5 mm
Single-row S 688 2Z GPR J GRW deep-groove ball bearing
Metal shields on both sides; compare the complete designation, including suffixes.
8x24x8 mm
Open single-row 628 deep-groove ball bearing for accurate support of small shafts and rotating mechanisms. It carries radial load and limited axial load in both directions.
Metal shields on both sides
Higher accuracy class P6
FAG 3803 2Z P6 bearing with precisely stated closure and accuracy class.
12x32x10 mm
Single-row 6201 Z BMZ deep-groove ball bearing
Metal shield on one side; compare the complete designation, including suffixes.
15.875x42.862x14.288 mm
NEU 11590/11520 single-row tapered roller bearing for combined radial and axial load in one direction. The separable cone-and-cup design simplifies mounting and precise adjustment of the bearing arrangement.
35x72x27 mm
ZKL double-row angular contact ball bearing for combined radial and axial loads.
15x32x9 mm
Single-row SKF 6002 2RS C3 deep-groove ball bearing
Rubber seals on both sides; C3 means greater radial internal clearance, so verify suitability.
12x28x8 mm
Metal shield on one side. ZKL single-row deep groove ball bearing for compact rotating assemblies.
10x15x4 mm
Single-row 6700 2Z (61700 2Z) FBJ deep-groove ball bearing
Metal shields on both sides; compare the complete designation, including suffixes.
10x30x9 mm
6200 2Z MSC deep-groove ball bearing with metal shields on both sides.
Product detailed description
No product's description available
60x150x35 mm
Open 6412 ZKL deep-groove ball bearing.
17x30x7 mm
Rubber seals on both sides. Thin-section ZVL single-row deep groove ball bearing for installations with limited radial space.
17x40x12 mm
6203 2RSH C3 SKF deep-groove ball bearing with two contact seals and increased radial clearance.
17x35x8 mm
ZKL 16003 bearing with clearly stated mounting dimensions. The product name gives no suffix for closure or clearance; compare the complete marking on the original bearing before replacement.
45x85x19 mm
6209 2RS SKF deep-groove ball bearing with rubber seals on both sides.
30x47x9 mm
61906 2RS ZVL deep-groove ball bearing with rubber seals on both sides.
7x22x7 mm
Rubber seals on both sides. Compact INA single-row deep groove ball bearing for protected rotating assemblies.
8x22x7 mm
INA 608 2Z C3 single-row deep-groove ball bearing with non-contact metal shields on both sides. A low-friction shielded design for radial and limited axial loads in both directions. The C3 suffix denotes greater-than-normal radial internal clearance.
30x72x20.75 mm
30306 E ZKL tapered roller bearing for combined radial and axial loads.
45x85x19 mm
6209 2RS ZKL deep-groove ball bearing with rubber seals on both sides.
30x72x19 mm
Rubber seals on both sides
Greater C3 radial internal clearance. Robust SKF single-row deep groove ball bearing for demanding rotating assemblies.
Metal shield on one side
INA NX 10 Z XL bearing with exact designation and a metal shield on one side.
9x24x7 mm
Compact ZKL single-row deep groove ball bearing for precise rotating assemblies.
35x72x33 mm
SKF insert ball bearing with a cylindrical bore, spherical outside surface and set-screw locking.
9x26x8 mm
SKF 629 2Z single-row deep-groove ball bearing with non-contact metal shields on both sides. A compact low-friction design for radial and limited axial loads in both directions.
Product rating
Be the first who will post an article to this item!
We can arrange delivery of almost any FAG product, even if it is not currently listed in our catalogue.
Send us the designation, a photo of the nameplate, dimensions or a description of the application, and we will check availability.
FAG – product identification and supply
The FAG designation may appear on different technical products and spare parts. To identify the exact item reliably, we therefore work from the complete marking and the available technical data.
The exact item should be selected by its complete designation and technical parameters. Dimensions, design, material and operating conditions are important when matching a replacement.
For an accurate quotation, please provide the full marking, required quantity and any available documentation. We will compare the specification and verify a suitable delivery option.
| Manufacturing company : | Schaeffler Technologies AG & Co. KG |
|---|---|
| Address : | Industriestraße 1–3, 91074 Herzogenaurach, Germany |
| E-mail : | info@schaeffler.com |