Bearings, Page 2
Product sorting
List of products
20x42x12 mm
Greater C3 radial internal clearance. ZKL single-row deep groove ball bearing for arrangements requiring increased clearance.
17x40x12 mm
Metal shield on one side. ZKL single-row deep groove ball bearing for versatile rotating assemblies.
17x40x12 mm
ZKL 1203 double-row self-aligning ball bearing with a cylindrical bore and open design.
Accommodates shaft-to-housing misalignment; for radial and light axial loads in either direction.
12x37x12 mm
ZKL 6301 2Z single-row deep groove ball bearing with non-contact metal shields on both sides. Dynamic load rating 9.8 kN, mass 0.06 kg.
25x47x12 mm
Open ZKL 6005 single-row deep-groove ball bearing for reliable radial and limited axial load carrying. Its versatile non-separable design suits a wide range of machinery applications.
25x47x12 mm
ZKL 6005 RS single-row deep-groove ball bearing with a contact rubber seal on one side. The seal improves protection against contamination and moisture while the opposite side remains open.
17x40x12 mm
NSK 6203 2RS single-row deep-groove ball bearing with contact rubber seals on both sides. The closed design helps retain lubricant and protects the raceways from contamination and moisture.
17x40x12 mm
CW 6203 2RS single-row deep-groove ball bearing with contact rubber seals on both sides. The closed design helps retain lubricant and protects the raceways from contamination and moisture.
15x26x12 mm
Radial spherical plain bearing GE 15 ES 2RS SKF with rubber seals on both sides. It accommodates angular movement and misalignment under high radial and combined loads.
25x47x12 mm
6005 FAG is an open, single-row deep-groove ball bearing. It supports radial load and moderate axial loads in both directions, while its low-friction design makes it suitable for higher speeds.
The open design has no shields or seals, allowing easy lubricant access and effective heat dissipation. It therefore requires a clean arrangement with suitable lubrication or external sealing.
17x40x12 mm
6203 C C3 FAG deep-groove ball bearing is an open single-row Generation C bearing with greater-than-normal C3 radial internal clearance. It supports radial loads and moderate axial forces in both directions with low friction. C3 provides extra allowance for thermal expansion or tighter fits, but it must match the machine design.
25x47x12 mm
6005 2RS SKF deep-groove ball bearing is a single-row radial bearing with rubber seals on both sides. It carries radial loads and moderate axial forces in either direction. The 2RS design helps protect the internal rolling contact from dust and moisture while retaining lubricant inside the bearing.
SS 6203 2RS neu stainless-steel deep-groove ball bearing is a single-row bearing with rubber seals on both sides. The stainless execution improves resistance to moisture and corrosion, while the seals protect the factory grease and bearing interior.
Needle roller bearing HK 2012 CX is a thin-walled bearing with a drawn outer cup, cage and needle rollers. Its open-ended design without an inner ring provides high radial load capacity within a very small radial space.
The raceway is normally formed by a hardened and ground shaft surface; when the shaft cannot meet the raceway requirements, a suitable separate inner ring must be used.
17x40x12 mm
Metal shields on both sides
Greater radial internal clearance
Single-row deep groove ball bearing 6203 2Z C3 SKF with non-contact steel shields on both sides and C3 radial internal clearance. Suitable for high-speed applications and arrangements where fits, temperature or load reduce the bearing's operating clearance.
12x37x12 mm
6301 Z ZKL single-row deep groove ball bearing with a non-contact metal shield on one side. Suitable for radial and moderate axial loads in both directions when one side of the bearing needs protection from coarse contamination.
17x35x12 mm
ZKL 51203 P6 thrust ball bearing is designed to carry axial load in one direction. It is used where force acting along the shaft axis must be reliably supported.
12x37x12 mm
6301 2RSH SKF deep groove ball bearing has contact rubber seals on both sides, helping retain lubricant and protect the raceways against contamination and moisture.