Bearing - 23038 W33M ZKL

Metal shields on both sides

605 ZZ KINEX single-row deep groove ball bearing with non-contact metal shields on both sides. The shields help retain lubricant and limit the ingress of larger contaminants while adding very little friction.

25x47x12 mm

6005 2RS C3 SKF single-row deep groove ball bearing with contact rubber seals on both sides. A compact solution for radial and moderate axial loads in both directions, protected against dust, contamination and lubricant loss. C3 provides greater radial internal clearance than the normal class.

Double-direction ZKL 52209 thrust ball bearing for axial loads in both directions.

Overall dimensions 35 × 73 × 37 mm. The separable two-row assembly is intended exclusively for axial forces and cannot carry radial loads.

25x52x15 mm

NJ 205 ZKL single-row cylindrical roller bearing with high radial load capacity. The NJ design locates the shaft axially in one direction while allowing axial displacement in the opposite direction.

30x62x38.1 mm

YET 206 SKF insert bearing with a spherical outside surface and eccentric locking collar for shaft attachment. Intended for matching bearing housings and units with a 30 mm shaft diameter.

Metal shield on one side

NX 10 Z XL INA combined needle roller and axial ball bearing, dimensions 10 × 19 × 18 mm. One compact unit carries radial load together with axial load acting in one direction.

20x42x12 mm

Single-row SKF Explorer 6004 2RSH deep groove ball bearing with low-friction seals on both sides and normal CN radial clearance. It carries radial and axial loads in both directions, is grease lubricated and requires little maintenance.