Bearing - 29330 M ZKL

9x24x7 mm

609 2Z ZKL single-row deep groove ball bearing with non-contact metal shields on both sides. Suitable for radial and moderate axial loads in both directions, combining low friction with protection of the lubricant from larger contaminants.

12x28x8 mm

6001 2Z SKF single-row deep groove ball bearing with non-contact metal shields on both sides. It combines low friction and lubricant retention with the ability to carry radial and moderate axial loads in both directions.

3x10x4 mm

623 ZKL single-row deep groove ball bearing in open design. A compact bearing for radial and moderate axial loads in both directions, intended for arrangements providing their own lubrication and protection.

20x42x12 mm

Single-row SKF Explorer 6004 2RSH deep groove ball bearing with low-friction seals on both sides and normal CN radial clearance. It carries radial and axial loads in both directions, is grease lubricated and requires little maintenance.

5x16x5 mm

625 B TPX ZKL single-row deep groove ball bearing in open design. A compact bearing for radial and moderate axial loads in both directions, intended for arrangements providing their own lubrication and protection.

10x30x9 mm

6200 Z ZKL single-row deep groove ball bearing with a non-contact metal shield on one side. Suitable for radial and moderate axial loads in both directions when one side of the bearing needs protection from coarse contamination.

30x62x17.25 mm

30206 A KLF single-row tapered roller bearing for high radial loads combined with axial load in one direction. The separable design allows the inner ring assembly and outer ring to be mounted independently.

34x64x37 mm

DAC 34640037 2RS KBS double-row ball bearing with contact rubber seals on both sides. A compact bearing for combined radial and axial loads in both directions, typically used in wheel-hub and similar precision arrangements.

20x37x9 mm

61904 2RS ZVL single-row deep groove ball bearing with contact rubber seals on both sides. A compact solution for radial and moderate axial loads in both directions, protected against dust, contamination and lubricant loss.

30x55x13 mm

6006 2RS ZVL single-row deep groove ball bearing with contact rubber seals on both sides. It carries radial and moderate axial loads in both directions while protecting the rolling elements from dust, contamination and lubricant loss.