Bearings, Page 222

Dimensions of the bearing: 3×10×4 mm (inner diameter × outer diameter × width)ZZ = metal shields on both sides, non-contact type.

Dimensions of the bearing: 55×100×21 mm (inner diameter × outer diameter × width)

Dimensions of the bearing: 17×35×10 mm (inner diameter × outer diameter × width)2Z = metal shields on both sides, non-contact type.

Dimensions of the bearing: 20×42×8 mm (inner diameter × outer diameter × width)

Dimensions of the bearing: 12×37×12 mm (inner diameter × outer diameter × width)2Z = metal shields on both sides, non-contact type.

The 6206 2RS DPI bearing is a ball bearing with a diameter of an inner hole of 30 mm, an outer ring diameter 62 mm and a width of 16 mm. This bearing is equipped with two rubber seals (2RS), which...

Dimensions of the bearing: 12×24×6 mm (inner diameter × outer diameter × width)2RSR = contact seals on both sides.

Dimensions of the bearing: 50×80×16 mm (inner diameter × outer diameter × width)

Dimensions of the bearing: 10×30×9 mm (inner diameter × outer diameter × width)2Z = metal shields on both sides, non-contact type.

Dimensions of the bearing: 15×35×15.9 mm (inner diameter × outer diameter × width)

Dimensions of the bearing: 52×57×12 mm (inner diameter × outer diameter × width)K = tapered bore 1:12.

Dimensions of the bearing: 5×16×10 mm (inner diameter × outer diameter × width)

Dimensions of the bearing: 40×68×15 mm (inner diameter × outer diameter × width)2Z = metal shields on both sides, non-contact type.

Dimensions of the bearing: 17×62×17 mm (inner diameter × outer diameter × width)

Dimensions of the bearing: 40×90×33 mm (inner diameter × outer diameter × width)

The 6206 FAG deposit is one of the most popular variants of ball bearings with a deep groove produced by the German company FAG. It has standard dimensions with an outer diameter of 62 mm, an...