ZKL, Page 7
We can arrange delivery of almost any ZKL product, even if it is not currently listed in our catalogue.
Send us the designation, a photo of the nameplate, dimensions or a description of the application, and we will check availability.
ZKL – product identification and supply
The ZKL designation may appear on different technical products and spare parts. To identify the exact item reliably, we therefore work from the complete marking and the available technical data.
The exact item should be selected by its complete designation and technical parameters. Dimensions, design, material and operating conditions are important when matching a replacement.
For an accurate quotation, please provide the full marking, required quantity and any available documentation. We will compare the specification and verify a suitable delivery option.
Product sorting
List of products
60x130x46 mm
ZKL 22312 KM double-row spherical roller bearing with a 1:12 tapered bore and machined brass cage.
For high radial and axial loads in either direction; accommodates angular misalignment.
17x40x12 mm
ZKL 1203 double-row self-aligning ball bearing with a cylindrical bore and open design.
Accommodates shaft-to-housing misalignment; for radial and light axial loads in either direction.
60x130x46 mm
ZKL 22312 KW33J double-row spherical roller bearing with a 1:12 tapered bore, W33 lubrication groove and three holes, and a J steel cage. The self-aligning design carries high radial loads together with axial loads in both directions.
25x62x17 mm
ZKL NJ 305 NA P6 single-row cylindrical roller bearing with high radial capacity, axial guidance in one direction and increased P6 accuracy. The NA design uses matched, non-interchangeable rings.
55x90x18 mm
ZKL 6011 single-row open deep groove ball bearing for radial and axial loads in both directions. Dynamic load rating 30.857 kN, mass 0.38 kg.
30x72x27 mm
ZKL 2306 double-row self-aligning ball bearing for arrangements with minor shaft-to-housing misalignment. Dynamic load rating 32.3 kN, mass 0.50 kg.
12x37x12 mm
ZKL 6301 2Z single-row deep groove ball bearing with non-contact metal shields on both sides. Dynamic load rating 9.8 kN, mass 0.06 kg.
35x72x17 mm
Single-row open ZKL 6207 deep groove ball bearing for radial loads and axial loads in both directions. The open design allows the lubrication method to be selected for the specific bearing arrangement.
17x35x10 mm
Single-row ZKL 6003-RS deep groove ball bearing with a rubber seal on one side. The sealed side helps protect the lubricant, while the opposite side remains open for the lubrication method defined by the bearing arrangement.
30x49.25x13.6 mm
ZKL PLC 23-5 special clutch ball bearing with a pressed-steel housing and steel cage. Intended for the later clutch design used on Škoda 105–130 vehicles; always confirm compatibility by designation and dimensions.
35x72x23 mm
ZKL NU 2207 single-row cylindrical roller bearing for high radial loads. The NU design has two integral flanges on the outer ring and permits axial displacement of the shaft relative to the housing in both directions, making it suitable for a non-locating bearing position.
40x80x18 mm
Metal shields on both sides
ZKL 6208 2Z single-row deep-groove ball bearing with a steel cage and non-contact shielding. Low friction and shields on both sides help retain the lubricant inside the bearing.
65x120x24.75 mm
ZKL 30213 E single-row tapered roller bearing for high combined radial and axial loads. Its separable design accommodates axial load in one direction and allows accurate adjustment of clearance or preload during installation.
40x90x25.25 mm
ZKL 30308 AJ2 single-row tapered roller bearing for high combined radial and axial loads. Its separable design accommodates axial load in one direction and allows accurate adjustment of clearance or preload during installation.
55x78x16 mm
ZKL 51111 A single-direction thrust ball bearing for carrying axial load in one direction. Its separable design simplifies mounting and inspection of the individual components.