Bearings, Page 19
Product sorting
Brands
Inner diameter d (mm)
Outer diameter D (mm)
Width B (mm)
List of products
12.7x28.575x6.35 mm
Imperial single-row deep groove ball bearing KLNJ 1/2 C RHP. Its compact open design supports low friction together with radial and moderate axial loads.
15x26x12 mm
Radial spherical plain bearing GE 15 ES 2RS SKF with rubber seals on both sides. It accommodates angular movement and misalignment under high radial and combined loads.
30x47x9 mm
Thin-section single-row deep groove ball bearing 6906 ZZ IBB with metal shields on both sides. Its compact cross-section, low friction and two-sided protection suit space-constrained rotating arrangements.
20x28x30 mm
Compact linear ball bearing KH 2030 PP INA for accurate linear motion on a 20 mm shaft. Wiper seals at both ends help retain lubricant and limit contaminant ingress.
8x16x5 mm
Miniature thin-section deep groove ball bearing 688 2Z RMB with metal shields on both sides. Its highly compact design provides low friction and protection for precise small mechanisms.
20x35x10 mm
Single-direction thrust ball bearing 51104 P5 ZKL in the higher P5 accuracy class. Its separable construction is designed for axial load in one direction and precise rotating arrangements.
30x55x17 mm
32006 JR DPI is a single-row tapered roller bearing for arrangements exposed to radial load together with axial load in one direction. Its separable design allows the inner ring assembly with cage and rollers to be mounted independently of the outer ring.
It is suitable for gearboxes, hubs, shafts and other precise industrial arrangements. Tapered roller bearings are normally used in opposed pairs when axial forces must be supported in both directions.
45x85x19 mm
1209 MGM is a double-row self-aligning ball bearing with a cylindrical bore. The spherical outer-ring raceway allows the bearing to accommodate angular misalignment and shaft deflection without excessive edge loading.
It is particularly suitable where perfect alignment between shaft and housing cannot be guaranteed. The bearing supports radial load and lighter axial loads in both directions.
25x62x17 mm
6305 2ZR FAG is a single-row deep-groove ball bearing with two non-contact metal shields. Its versatile design supports radial load and moderate axial loads in both directions, while low friction makes it suitable for higher speeds.
The shields help retain lubricant and limit the entry of larger contaminants. This is a general-purpose machine bearing, not a contact-sealed or watertight design.
20x52x15 mm
6304 2RSH SKF is a single-row deep-groove ball bearing with contact seals on both sides. The seals help retain lubricant and protect the rolling space from dust, moisture and other common contaminants.
Its versatile design supports radial load and moderate axial loads in both directions. It is well suited to applications where dependable bearing protection and low maintenance requirements are important.
40x65x22 mm
NA 40 V ZKL is a full-complement needle roller bearing with an inner ring, dimensionally corresponding to type NKIS40. The V design uses a full complement of needles without a cage, providing high radial load capacity in a compact cross-section.
It is intended primarily for high radial loads at low to moderate speeds. The separate inner ring also permits use where the shaft cannot be prepared as a precision raceway.
17x47x14 mm
6303 2RSH SKF is a single-row deep-groove ball bearing with contact seals on both sides. The seals help retain lubricant and protect the rolling space from dust, moisture and other common contaminants.
Its versatile design supports radial load and moderate axial loads in both directions. It is well suited to applications where dependable bearing protection and low maintenance requirements are important.
30x72x19 mm
6306 2Z TIMKEN is a single-row deep-groove ball bearing with two non-contact metal shields. Its versatile design supports radial load and moderate axial loads in both directions, while low friction makes it suitable for higher speeds.
The shields help retain lubricant and limit the entry of larger contaminants. This is a general-purpose machine bearing, not a contact-sealed or watertight design.
25x62x17 mm
6305 2RSR FAG is a single-row deep-groove ball bearing with contact seals on both sides. The seals help retain lubricant and protect the rolling space from dust, moisture and other common contaminants.
Its versatile design supports radial load and moderate axial loads in both directions. It is well suited to applications where dependable bearing protection and low maintenance requirements are important.
25x47x12 mm
6005 FAG is an open, single-row deep-groove ball bearing. It supports radial load and moderate axial loads in both directions, while its low-friction design makes it suitable for higher speeds.
The open design has no shields or seals, allowing easy lubricant access and effective heat dissipation. It therefore requires a clean arrangement with suitable lubrication or external sealing.
6x19x6 mm
626 2Z FAG is a single-row deep-groove ball bearing with two non-contact metal shields. Its versatile design supports radial load and moderate axial loads in both directions, while low friction makes it suitable for higher speeds.
The shields help retain lubricant and limit the entry of larger contaminants. This is a general-purpose machine bearing, not a contact-sealed or watertight design.
17x35x10 mm
6003 2Z ZVL is a single-row deep-groove ball bearing with two non-contact metal shields. Its versatile design supports radial load and moderate axial loads in both directions, while low friction makes it suitable for higher speeds.
The shields help retain lubricant and limit the entry of larger contaminants. This is a general-purpose machine bearing, not a contact-sealed or watertight design.
6x19x6 mm
626 ZR ZKL is a single-row deep-groove ball bearing with one non-contact metal shield. Its versatile design supports radial load and moderate axial loads in both directions, while low friction makes it suitable for higher speeds.
The shields help retain lubricant and limit the entry of larger contaminants. This is a general-purpose machine bearing, not a contact-sealed or watertight design.