ZKL, Page 10

20x52x16.25 mm

30304 A ZKL single-row tapered roller bearing for high combined radial and one-direction axial loads.

17x35x10 mm

6003 2Z ZKL single-row deep-groove ball bearing with metal shields on both sides for lubricant protection and low friction.

40x90x33 mm

2308 ZKL double-row self-aligning ball bearing with a spherical outer-ring raceway to accommodate misalignment and shaft deflection.

75x160x55 mm

22315 J ZKL double-row spherical roller bearing with high load capacity and a self-aligning design for heavy-duty arrangements subject to misalignment.

25x52x18 mm

2205 ZKL double-row self-aligning ball bearing with a spherical outer-ring raceway to accommodate misalignment and shaft deflection.

90x190x64 mm

2318 K ZKL self-aligning ball bearing has two rows of balls, a common spherical raceway in the outer ring and a tapered K bore. It accommodates angular misalignment between shaft and housing while carrying mainly radial load plus lighter axial load in both directions. It is well suited to positions where shaft deflection or alignment error cannot be fully avoided.

35x72x17 mm

NJ 207 ZKL cylindrical roller bearing is a single-row radial bearing with high load capacity and rigidity. The NJ design has two guiding flanges on the outer ring and one on the inner ring, allowing it to carry radial load, locate the shaft axially in one direction and permit axial displacement in the opposite direction.

40x80x18 mm

6208 2RS ZKL deep-groove ball bearing is a single-row radial bearing with rubber seals on both sides. It carries radial loads and moderate axial forces in either direction. The 2RS design helps protect the internal rolling contact from dust and moisture while retaining lubricant inside the bearing.

50x110x29.25 mm

30310 A ZKL tapered roller bearing is a robust single-row bearing for high radial loads combined with axial load in one direction. Its separable design allows the inner ring with rollers and the outer ring to be mounted independently. For a correct replacement, compare the complete designation including suffix A, the dimensions and required clearance with the original part.

45x100x39.7 mm

3309 ZKL double-row angular-contact ball bearing carries high radial loads together with axial forces in both directions. Two ball rows provide rigid axial location and the ability to support tilting moments in a compact unit. It suits positions where a single-row ball bearing does not provide sufficient axial capacity.

45x75x16 mm

6009 2RS C3 ZKL deep-groove ball bearing is a single-row radial bearing with rubber seals on both sides. It carries radial loads and moderate axial forces in either direction. The 2RS design helps protect the internal rolling contact from dust and moisture while retaining lubricant inside the bearing. C3 radial internal clearance is greater than normal, providing extra allowance for thermal expansion or tighter fits; it must match the machine design.

35x72x17 mm

6207 2Z ZKL deep-groove ball bearing is a single-row radial bearing with non-contact metal shields on both sides. It supports radial loading and moderate axial forces in either direction. The 2Z shields help retain lubricant and keep out coarse contaminants while maintaining low friction and suitability for higher speeds.