6015 M C4 URB

12x32x10 mm

6201 ZD NSK single-row deep groove ball bearing for radial and moderate axial loads in both directions. The manufacturer-specific ZD suffix is part of the specification and the complete designation must be matched when replacing the bearing.

35x80x21 mm

6307 ZKL single-row deep groove ball bearing in an open design. Deep raceways carry radial and moderate axial loads in both directions with low friction.

20x42x12 mm

Single-row SKF Explorer 6004 2RSH deep groove ball bearing with low-friction seals on both sides and normal CN radial clearance. It carries radial and axial loads in both directions, is grease lubricated and requires little maintenance.

25x33x20 mm

NK 25/20 INA needle roller bearing without an inner ring provides high radial load capacity within a very small cross-section. The needles run directly on a suitably hardened and ground 25 mm shaft raceway.

12x28x8 mm

6001 2Z SKF single-row deep groove ball bearing with non-contact metal shields on both sides. It combines low friction and lubricant retention with the ability to carry radial and moderate axial loads in both directions.

7x22x7 mm

627 ZKL single-row deep groove ball bearing in an open design. Deep raceways carry radial and moderate axial loads in both directions with low friction.

22328 CC/W33 SKF
double-row spherical roller bearing
140 × 300 × 102 mm
CC · W33

25x52x15 mm

6205 2Z SKF single-row deep groove ball bearing with non-contact metal shields on both sides. It combines low friction and lubricant retention with reliable radial and moderate axial load support in both directions.