1310 ZVL
Related products
20x52x15 mm
SKF 6304 2RS C3 single-row deep-groove ball bearing with rubber seals on both sides.
C3 denotes greater-than-normal radial internal clearance; for radial and limited axial loads in either direction.
8x22x7 mm
INA 608 2Z C3 single-row deep-groove ball bearing with non-contact metal shields on both sides. A low-friction shielded design for radial and limited axial loads in both directions. The C3 suffix denotes greater-than-normal radial internal clearance.
SKF BA 9 bearing for accurate replacement by the complete original-part designation.
45x75x16 mm
FAG single-row deep groove ball bearing with metal shields on both sides (2Z).
30x62x16 mm
7206 ZKL angular-contact ball bearing for combined radial and axial loads.
15.875x42.862x14.288 mm
NEU 11590/11520 single-row tapered roller bearing for combined radial and axial load in one direction. The separable cone-and-cup design simplifies mounting and precise adjustment of the bearing arrangement.
35x72x33 mm
SKF insert ball bearing with a cylindrical bore, spherical outside surface and set-screw locking.
20x32x7 mm
61804 2RS KINEX deep-groove ball bearing with rubber seals on both sides.
25x52x16.25 mm
KBS single-row tapered roller bearing for combined radial and axial load in one direction.
30x47x11 mm
Single-direction ZKL thrust ball bearing for carrying axial load in one direction.
E 15 ZKL bearing
For a reliable selection, compare the complete designation and design with the original part.
Double-direction ZKL 52209 thrust ball bearing for axial loads in both directions.
10x26x8 mm
6000 ZR ZKL deep-groove ball bearing with a metal shield on one side.
10x26x8 mm
SKF 6000 2Z single-row deep-groove ball bearing with non-contact metal shields on both sides. A low-friction shielded design for radial and limited axial loads in both directions.
60x150x35 mm
Open 6412 ZKL deep-groove ball bearing.
Product detailed description
No product's description available
16x22x12 mm
Thin-walled HK 1612 neu drawn cup needle roller bearing with open ends for compact radial arrangements.
Large radial internal clearance
9x26x8 mm
629 RS ZKL deep-groove ball bearing with a rubber seal on one side.
17x35x10 mm
ZVL 6003 2RS single-row deep-groove ball bearing with rubber seals on both sides. A versatile design for radial and limited axial loads in both directions, protected against common contaminants.
30x60.03x37 mm
SKF double-row angular contact ball bearing with contact seals on both sides; VKBC 20081 / BA2B 246033.
12x37x12 mm
6301 2RS ZVL deep-groove ball bearing with rubber seals on both sides.
25x47x12 mm
ZVL single-row deep groove ball bearing with rubber seals on both sides (2RS).
12x32x10 mm
Single-row 6201 RS ZKL deep-groove ball bearing
Rubber seal on one side; compare the complete designation before ordering.
30x72x20.75 mm
30306 E ZKL tapered roller bearing for combined radial and axial loads.
8x24x8 mm
Open single-row 628 deep-groove ball bearing for accurate support of small shafts and rotating mechanisms. It carries radial load and limited axial load in both directions.
35x72x27 mm
ZKL double-row angular contact ball bearing for combined radial and axial loads.
45x85x20.75 mm
30209 A KLF-ZVL tapered roller bearing for combined radial and axial loads.
45x85x19 mm
ZKL 6209 K bearing with verified mounting dimensions; compare the complete K suffix before replacement.
17x40x12 mm
Metal shield on one side. ZKL single-row deep groove ball bearing for versatile rotating assemblies.
15x32x9 mm
Single-row SKF 6002 2RS C3 deep-groove ball bearing
Rubber seals on both sides; C3 means greater radial internal clearance, so verify suitability.
Product rating
Be the first who will post an article to this item!
We can arrange delivery of almost any ZVL product, even if it is not currently listed in our catalogue.
Send us the designation, a photo of the nameplate, dimensions or a description of the application, and we will check availability.
ZVL – product identification and supply
The ZVL designation may appear on different technical products and spare parts. To identify the exact item reliably, we therefore work from the complete marking and the available technical data.
The exact item should be selected by its complete designation and technical parameters. Dimensions, design, material and operating conditions are important when matching a replacement.
For an accurate quotation, please provide the full marking, required quantity and any available documentation. We will compare the specification and verify a suitable delivery option.
| Manufacturing company : | ZVL SLOVAKIA, a.s. |
|---|---|
| Address : | Na stanicu 22, 010 09 Žilina, Slovakia |
| E-mail : | sales.zvl@zvlslovakia.sk |